Bought a Window Air Conditioning Unit for Apartment? Avoid Making These 5 Mistakes

Window air conditioners are lifesavers for renters who don’t have central A/C. But they can be a sizeable investment, so make sure you treat yours right! Common mistakes renters make after buying a window air conditioning unit for apartment include:

  1. Forgetting to clean the air filter (or forgetting the filter exists!)
  2. Cleaning the A/C improperly
  3. Leaving it in the window while away on vacation
  4. Leaving it in the window in the fall and winter
  5. Storing it in an apartment basement storage room or shed

Here’s how (and why) to avoid these pitfalls.

1. Forgetting to Clean the Air Filter

All window air conditioning units come with a removable air filter. This component is there to catch dust, pollen, and other indoor air pollutants that pass through the air conditioner’s intake. So, it should come as no surprise that the filter gets dirty over time, especially if you have pets in the apartment.

The more the filter gets clogged with debris, more restricted the air flow and the harder the window air conditioning unit must work to draw in air. As a result, the unit becomes less efficient and wastes energy. Definitely a problem if your electricity isn’t inclusive in the rent.

To clean the air filter of a window air conditioning unit for apartment:

  1. Turn off the air conditioner
  2. Disconnect the power cord
  3. Remove the front panel
  4. Pull the filter out of the slot
  5. Wash it under warm water
  6. Let the filter dry COMPLETELY
  7. Put the filter back in the air conditioner and close the front panel

2. Cleaning Improperly

Cleaning a window air conditioner isn’t too difficult, but there’s definitely a wrong way to do it.

Two wrong ways, in fact.

If your air conditioner is smelling a bit musty (which indicates the presence of mold), the best course of action is to spray it down with hydrogen peroxide. The diluted formula available in the cleaning section of most hardware stores will do. Hydrogen peroxide will kill off the mold, but does not pose a danger to you or risk harming the air conditioner

What you don’t want to do is use bleach or alcohol. Bleach is effective in killing mold, but it’s also highly toxic, and you don’t want those fumes being pushed into your room via the air conditioner. As for alcohol, it’s flammable, which is never something you want to mix with a large mechanical device in your house.

3. Leaving It in While You’re Away on Vacation

You’d never leave for summer vacation without locking your apartment door. But what about the window propped open by an air conditioner?

If the window can be reached from the ground (via a ladder, roof or another structure), that air conditioner makes it easier for a potential burglar to get inside your apartment.

Putting a stick or a lock bar between the window and the unit doesn’t cut it. For long periods away, it’s best to remove the window air conditioner and lock the window proper.

4. Leaving It in Late-Season

It’s never a good idea to leave an air conditioner running after the temperature drops outside. Air conditioners are liable to freeze up (literally) once the outdoor temperature dips below 12 degrees.

Leaving a window air conditioner for apartments in the window also creates a draft, which makes it unnecessarily cold inside your place and causes the heating system (be it a furnace, boiler, gas fireplace, etc.) to drain more energy.

5. Storing It in a Basement or Shed

Window air conditioners are a favourite winter hiding place for insects and rodents. Mice are particularly fond of chewing at the wiring, turning your expensive new A/C into a piece of scrap.

It’s never a good idea to store your window air conditioner anywhere that critters could get at it. That includes your apartment’s storage room, if yours is anything like the ones I’ve experienced (and if so, I’m sorry). The same goes for outdoor storage sheds.

The best place to store a window air conditioning unit in the winter is tucked in the back of a closet, safe inside the box it came in.

Joint Health And Safety Committee Certification

The joint health and safety committee (JHSC) embodied by employees and employers at Ontario workplaces. Every company needs to be established and have a maintained workplace which would typically need its own JHSC. To execute their responsibilities successfully, affiliates of joint health and safety committee must obtain training called “certification”. This is a requirement to all members of joint health and safety committee to finish the training and get their certification to perform their duties. It signifies that there’re all certified to do the right thing during the emergency at the workplace. The certification also to determine that a member of joint health and safety committee finished the required training and they are now authorized to do so.

All training done to be a qualified member of joint health and safety committee or JHSC has this phases. The Part 1, Part 2 and refresher training. All the Participants will learn about common workplace threats and key steps to execute the right thing during the dangers. Even you completed the training for joint health and safety committees Part 1 in the workplace, you must complete Part 2 training under the new conditions in order to be certified and soon you will be required to take refresher training to maintain the certification. These new standards in order to be certified was approved last March 1, 2016. All members need to follow the new conditions. They need to comply to be fully certified.

training

The knowledge that all participants acquired during the training will be carry out to workplace inspections and accident investigations, and enable them to function efficiently as a legit JHSC members. All JHSC members that completed the all the trainings, you may contact the Ministry of Labour if you haven’t received yet the certified member cards. You need to make sure you get your jhsc certification for no proof will hold your participation for your duties.